Case Studies
Shielded Modular Data Center (EMP/IEMI Protection)
Fully shielded modular enclosure with verified Faraday-grade protection, EMP-rated SPDs, and concurrent-maintainable power/cooling for sensitive workloads.
Read the case study
Public-Sector Modular Data Center (Energy-Efficient, Relocatable Build)
Two joined 40-ft containerized data centers hosting up to 120 kW IT load, combining hybrid free-cooling with DX systems for Tier III resilience and low OPEX.
Read the case study
Modular Data Centers for National Road-Traffic Video Capture Infrastructure
Two-site, four-module complex providing 320 kW total IT load, N+1 power and cooling, and full data replication for nationwide traffic-violation analytics.
Read the case study
Mobile All‑in‑One MDC on Wheeled Platforms
40-ft containerized data center with six racks (40 kW) on wheeled platforms, relocatable within one hour through pre-staged quick-disconnect systems.
Read the case study
Deployable Edge Data Center for International Mission in Eastern Europe
ISO-width modular cluster delivering 40 kW across four racks for a temporary security mission, built to Tier III principles and redeployable at mission end.
Read the case study
Indirect Free Cooling MDC in Dense Urban Courtyard
Two shortened modules providing 35 kW IT load with indirect free-cooling, engineered to pass through a narrow archway and operate inside a historic courtyard.
Read the case study
FAQ
What is a modular data center?
A modular data center (MDC) is a prefabricated, container-based data center that integrates racks, power, cooling, and security systems inside portable enclosures. Unlike traditional on-site construction, a containerized modular data center is factory-built, tested, and shipped ready for installation. ModulEdge designs scalable modular data centers from 5–50 kW per rack with DX, chilled-water, adiabatic, and free-cooling options — engineered for edge and AI workloads where reliability and low latency matter most.
Why consider a modular data center?
A container modular data center enables faster deployment, lower risk, and predictable performance compared to conventional builds. Prefabricated and tested in the factory, these systems minimize site work and allow operators to scale step-by-step as demand grows. Organizations in telecom, industry, energy, and defense choose mobile and containerized data centers to place compute closer to operations, improve resilience, and maintain on-prem control of sensitive workloads. ModulEdge’s portable modular data center solutions combine EU engineering with ruggedized designs for harsh conditions.
How are modular data centers different from traditional data centers?
Traditional data centers are built on-site, requiring long construction cycles and multiple contractors. A prefabricated modular data center is built in controlled factory conditions, integrating power, cooling, fire suppression, and monitoring systems before shipment. This approach cuts deployment from years to months, ensures quality through FAT/SAT testing, and allows redeployment when operations move. ModulEdge’s containerized data center infrastructure offers the same Tier III/IV design principles as conventional facilities — with faster rollout, lower cost, and modular scalability.
Are you Tier III certified?
Our modules are designed to meet Tier I - IV principles. Certification applies to a specific site and build; we support auditor engagement for deployments that pursue certification.
Do you support AI training clusters?
No. We position for edge AI inference at ≥40 kW per rack. Training‑class densities (≈120–150 kW/rack) are not feasible in this form factor.
What’s the typical lead time?
Custom builds: 3–6 months. Commissioning depends on scope and site readiness (power, pad, network). We’ll confirm a schedule during design review.
How do you handle hot or variable climates?
We match DX, chilled‑water, adiabatic, or free‑cooling to your climate and energy costs, targeting predictable efficiency (modeled PUE) and thermal headroom.
Can the modules handle harsh environments?
Yes – dust/sand/humidity hardening, vibration tolerance, and optional EMP shielding are available to maintain uptime in demanding sites.
Will this integrate with our existing monitoring and access control?
Yes. We deliver integrated monitoring and access/CCTV and align interfaces during design review to fit your tooling and security policies.
Can we redeploy modules later?
Yes. Standard 20‑ft and 40‑ft footprints with a redeployable approach; we provide rigging/placement plans and support relocation.
Do you sell direct or via partners?
We’re partner‑first (OEM/whitelabel and system integrators). End‑user projects are delivered with or through partners.